MECHANICAL ENGINEERING
Brochures
  Syllabus
DEPARTMENT HIGHLIGHTS

The Department of Mechanical Engineering started in the year 2002 with an intake of 60 students. The intake was increased to 120 for the academic year 2009-10 and further increased to 180 during the academic year 2012-13.


Read more
VISION, MISSION, OBJECTIVE & OUTCOMES

To develop the Department of Mechanical Engineering into a center of excellence where students can learn to become Mechanical Engineers of the highest quality in order meet the rapidly evolving global needs of industry and society. To develop ...

Read more
PROJECT HIGHLIGHTS

Numerous projects related to Numercial Simulation of Complex Flows with Laminar to Turbulent Transition, Kinetic energy recovery system for two wheelers, Laser induced ignition system for IC engines, E-Pilot, Wind turbine driven generator for vehicles...

Read more
Publications

1. Suraj R, Harish N, "DESIGN OPTIMISATION AND LIFE ESTIMATION OF SPLIT HUB GEOMETRY OF FSAE CAR", Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016, November 11-17, 2016, Phoenix, Arizona, USA 2016.

2. Sajjan Raj Keshari, Sandeep G, “The effect of SiCp reinforcement on the Microstructural Mechanical Properties and Tribological Behavior of A-356 Alloy”, paper presented at 5th National Conference on Emerging Trends in Engineering Technologies – ETET 2016, held on 11th and 12th March 2016 at Jyothi Institute of Technology, Bangalore.


FACULTY NAME : Dr. P G Mukunda

DESIGNATION : PROFESSOR

  • Effect of process parameters on centrifugally cast Al-Si FGM" TMS2013, 142nd Annual Meeting and Exhibition, 2013, USA.
  • A study to understand Al6061-ZrSiO4 Metal Matrix Composites" International Conference On Recent Advances in Material Processing Technology (RAMPT'13)", 07-09 Jan 2013, NEC, Kovilpatti, Tamilnadu.
  • Effect of Process Parameters on Centrifugally Cast Al-Si FGM", Light Metals 2013 (ed B. A. Sadler), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118663189.ch79.
  • Numerical simulation and Experimental validation of non-linear deformation of GLARE", V65 N3/777, 2013, Journal of aerospace sciences and technologies
  • Desai Gowda,PGMukunda Mervin A.Herbert “Co-relation of tribological properties with microstructure and mechanical properties of graphite cast irons centrifugally cast for engine liner” “Transactions of the Indian Institute of Metals (Springer): Volume 67, Issue 5 (2014), Page 731-740.
  • Desai Gowda,PGMukunda Mervin A.Herbert Influence of process parameter on properties of cast irons Journal of Manufacturing Engineeing Volume 9, Issue 1 (2014)
  • Desai Gowda H S, Mukunda P G, Mervin A Herbert, “Effect of centrifugal and gravity casting technique over metallographic and mechanical properties of spheroidal graphite iron" Characterization of Minerals, Metals, and Materials 2013 (TMS 2013)

FACULTY NAME : Dr. SEKHAR MAJUMDAR

DESIGNATION : PROFESSOR

Papers Published by Prof. S. Majumdar in Journals and Conference Proceedings (2010-2013)

  • Vashista G.A ,Satish G, Sekhar Majumdar, : CFD Simulation of Turbulent Flows with Laminar to Turbulent Transition", Proceedings NAFEMS India Regional Conference 2015, Engineering Analysis Modelling and simulation held at Hilton Hotel ,Chennai on February 6th to 8th 2015.
  • Nuthan Prasad B.S,MajumdarS.,Numerical Simulation of Turbulent Flow past a Low Aspect Ratio Wing, Proceedings 40th National Conference on Fluid Mechanics and Fluid Power, to be held at NIT Hamirpur from December 12th to 14th ,2013.
  • Chethan K .S, Dileep Kumar S C, Nuthan Prasad B.S, and S. Majumdar, Simulation of Flow past a Double Slotted Aerofoil using Multiblock Structured Grid, Proceedings, 14th Asian Congress of Fluid Mechanics - 14ACFM held at Hanoi and Halong, Vietnam from October 15 - 19, 2013.
  • Satish G, Dileep Kumar S C, Nuthan Prasad BS , Sekhar Majumdar., "Simulation of Heat Transfer due to Laminar Natural Convection in Non-Rectangular Enclosures" , ANUSANDHANA-Journal of Science, Engineering and Management, vol-02 Issue-01,March-2013.
  • Rajani B.N., Kandasamy A., Majumdar S., On the reliability of eddy viscosity based turbulence models in predicting turbulent flow past a circular cylinder using URANS approach, Journal of Applied Fluid Mechanics, vol. 5,no.1,pp 67-79,2012.
  • SekharMajumdar., "Cfd for Design and Analysis of Engineering Systems involving Low Speed Turbulent Flow" , ANUSANDHANA-Journal of Science, Engineering and Management, vol-01 Issue-01,March-2012.
  • Satish G., Nuthan Prasad B S., Dileepkumar and Majumdar S. Simulation of Heat Transfer due to Laminar Natural Convection in Non Rectangular Enclosures, ANUSANDHAN , NMIT Journal of Science, Engineering and Management Bangalore, vol.2, no1,2013.
  • Majumdar S., CFD for Design and Analysis of Engineering System involving Low Speed Turbulent Flow, ANUSANDHAN, NMIT journal of science, Engineering & Management, Bangalore, vol.1, no.1, March 2012.
  • Ranjani B. N., Kandasamy A., Majumdar S., On the reliability of eddy viscosity based turbulence models in predicting turbulent flow past a circular cylinder using a URANS approach , Journal of Applied fluied Mechanics, Vol.5, no.1, pp67-79,2012.

FACULTY NAME : Dr. P. BALACHANDRA SHETTY

DESIGNATION : PROFESSOR

International Journals:

  • MonimoySaha, Balachandra P Shetty, Kiran Aithal, Mukunda P.G, Synthesis and Comparative Study of Microwave and ConventionallySintered Al-SiC MMC through Power Metallurgy, International Journal of Latest Technology & Applied Science, Issue VIII, Volume III, August 2014, pp 22-26.
  • Pavan Kumar AV, Vinayaka N, P.Balachandra Shetty, KiranAithal, Gowtham V, Design and Optimization of Helical Compression Spring for a Speed Breaker Application using Six-Sigma Regression Tool, International Journal of Emerging Technology and Advanced Engineering, Volume -4, Issue 8, August 2014, pp 501-504.
  • Vinayaka N, Pavan Kumar AV, P.Balachandra Shetty, KiranAithal S and Krithi H Kornaya, Design based Electial Power Generation using a Speed Breaker – A Green Power Approach, International Journal of Current Engineering and Technology, Volume 4, Number-4, August 2014, pp 2818-2822.
  • P.Balachandra Shetty, Ambikashri, Apoorva K Murthy, H.Sarojadevi, P.G.Mukunda, Digital Image Processing Technique for Micro Structure Analysis of Spheroidal Graphite Iron, International Journal of COMADEM, Volume-17, Number -2, January 2014, pp 11-15.
  • P.Balachandra Shetty, KiranAithal, Viresh.K.Basalalli, Numerical simulation and Experimental Validation of Nonlinear Deformation of GLARE, paper has been accepted for publication in Journal of Aerospace Sciences and Technologies. Volume 65, No-3, August 2013
  • P.Balachandra Shetty, P.G.Mukunda and V.K.Basalalli. Computational Approach for the Structural Analysis of Glass Reinforced Hybrid Material. International Journal on Mechanical & Automobile Engineering, IJME, ISSN 0974-231X, Spring Edition 2012, February-March 2012, Volume 21, Issue No-01, pp: 29-40.
  • P.Balachandra Shetty, P.G.Mukunda and V.K.Basalalli. A Novel Method for Machining coupons of Glass Reinforced hybrid laminate. International Journal on Mechanical & Automobile Engineering (IJME) ISSN 0974-231X, Special edition 2012, February-March 2012,Volume 22, Issue No-01, pp 38-45.
  • P.Balachandra Shetty, P.G.Mukunda and V.K.Basalalli. Numerical Analysis of Aircraft Wing Leading Edge of GLARE(GLAssREinforced) Materials. International Journal of COMADEM, 14(3), July 2011, PP. 22-27.
  • S.Raghavendra, Lingaraju2 P Balachandra Shetty, PG Mukunda, Mechanical Properties of Short Banana Fiber Reinforced Natural Rubber Composites, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2, Issue 5, May 2013, pp 1652-1655.
  • Raghavendra.S, Dr.P.Balachandrashetty, Dr.P.GMukunda. Dr.K.G.Sathyanaraya, The Effect of Fiber Length on Tensile Properties of Epoxy Resin Composites Reinforced by the Fibers of Banana, International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 6, August – 2012, pp 1-3.
  • VeerabhadrappaAlgur, V.R.Kabadi, Sharanabasappa M, Ganechari S.M, P.B.Shetty, Optimization of Sliding specific wear and Frictional Force behaviour of Modified ZA-27 alloy using Taguchi Method, International Journal of Recent and Innovation trends in Computing and Communication, Volume-3, Issue-5, May 2015, pp 2644-2649.
  • Surindra B.S, Sandeep G.M, P.Balachandra Shetty, Design and Fabrication of Latest Technology In Engineering, Management & Applied Science ISSN : 2278-2540, Volume 4, Issue VI, June-2015, pp 17-17.

FACULTY NAME : Dr. DESAI GOWDA H S

DESIGNATION : PROFESSOR

  • Hamritha S, Desai Gowda H S., “Study of mechanical properties of Faded spheroidal graphite iron International Conference on emerging trends in manufacturing engines and Modelling”, IJAER publications PP10283-10286,2015.
  • Desai Gowda, PGMukunda Mervin A.Herbert “Co-relation of tribological properties with microstructure and mechanical properties of graphite cast irons centrifugally cast for engine liner” “Transactions of the Indian Institute of Metals (Springer): Volume 67, Issue 5 (2014), Page 731-740
  • Desai Gowda, PGMukunda Mervin A.Herbert Influence of process parameter on properties of cast irons Journal of Manufacturing Engineeing Volume 9, Issue 1 (2014)
  • Desai Gowda H S, Mukunda P G, Mervin A Herbert, “Effect of centrifugal and gravity casting technique over metallographic and mechanical properties of spheroidal graphite iron" Characterization of Minerals, Metals, and Materials 2013 (TMS 2013)

FACULTY NAME : Dr. KIRAN AITHAL

DESIGNATION : PROFESSOR

Papers Published:

    Papers Published

  • "Experimental Studies of Flow Patterns of Different Fluids in a Partially Filled    Rotating Cylinder”, Journal of Applied Fluid Mechanics, Vol.2, No.1, pp.47-51,2008.
  • "Influence of teeming temperature of molten metal of Tin during centrifugal casting” IJCMR, Vol 23, 2010, 51-54.
  • "Characterization of Al-Si Functionally Graded material using Centrifuge Casting Method"- International review of Mechanical Engg. Vol.3, N.5, Sep 2009.
  • "Effect of L/D ratio on Al-Si Functionally Graded Material cast through Centrifuge Technique"- Vol. 213 (2011) pp 281-285, Advanced Materials Research Journal, Switzerland.
  • "Evolution of Microstructure and Hardness of Al-Si Functionally Graded Material Cast through centrifuge Technique using Hypereutectic and Eutectic Al-Si" – Vol 6, (2011), No2, 275-279 IJMME.
  • "Microstructure, Hardness and Wear Characterization of Al-Si FGMs"- Vol 58, No.5, May 2012, Indian Foundry Journal.
  • "Effect of Process Parameters on Centrifugally Cast Al-Si FGM", (TMS2013) Light Metals 2013 (ed B. A. Sadler), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118663189.ch79.
  • "Numerical simulation and Experimental validation of non-linear deformation of GLARE", V65 N3/777, 2013, Journal of aerospace sciences and technologies.
  • "Characterization of Al-17wt.%Si using centrifugal casting", Applied Mechanics and Materials Vols 766-767 (2015) pp 399-404, Trans Tech Publications, doi:10.4028/www.scientific.net/AMM.766-767.399.
  • "Effects of 4.5% Copper addition and Melt Treatment on Microstructure and Wear Properties of Al-7Si Alloy" Applied Mechanics and Materials Vols 766-767 (2015) pp 410-415, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.766-767.410.
  • "Development and Characterization of Al-Si-Cu FGM using Centrifuge Technique" Applied Mechanics and Materials Vols 766-767 (2015) pp 438-442, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.766-767.438.
  • "Investigation of Particle Segregation and Solidification time in FGM's using Centrifuge casting technique" Applied Mechanics and Materials Vols 766-767 (2015) pp 956-961, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.766-767.956.
  • "The Influence of the Addition of 4.5 wt.% of Copper on Wear Properties of Al-12Si Eutectic Alloy’’,ShivaprasadChannappagoudar, KiranAithal, NarendranathSannayallappa, Vijay Desai, PudukottahGopaliengarMukunda, Jordan Journal of Mechanical and Industrial Engineering, Volume 9 Number 3, Pages 217 – 221, June.2015.

    Papers Presented:

  • "Tensile and Compressive analysis of a cruciform joint – A FEM study”, National Conference on Recent Welding Technologies-2005, GVIT, KGF.
  • "An Understanding Fluid Behaviour in Centrifugal Casting, Part 1”  Tohoku University, Sedai, Japan, Dec, 2007.
  • "Fabrication and Characterization of AL/17%Si Functionally Graded Composite Material using Centrifuge casting method”. National conference of ETME-09, Oxford College, Bangalore.
  • "Wear Characterization of Al/17wt% Si Functionally Graded Material"- Tribo-India Conference. IIT Delhi, Dec 2009.
  • "Microstructure and Wear Characterization of Hypereutectic Al-Si FGM"- TMS2010, 139th Annual Meeting and Exhibition, 2010, USA
  • "Characterization of Al-Si Functionally Graded Material Cast through centrifuge technique"- ICFIME- May 2010, NITK Surathkal, India
  • "Evaluation of Microstructure and Hardness of Al-17wt% Si-7wt%SiC Functionally Graded Composite"- AMMMT 2010, SIT Tumkur.
  • "Effect of L/D ratio on Al-Si Functionally Graded Material cast through Centrifuge Technique"-ICAMR 2011, Chongquing, China.
  • "Microstructure, Hardness characterization of Al-Si FG alloy and Al-Si- SiCP FGMMC"- 3rd Asian Conference on Mechanics of Functional Materials and Structures, Dec 2012, IIT Delhi.
  • "Bird Impact mechanics on aircraft wing leading edge of GLARE (GLAssREinforced) structure using simulation", 3rd Asian Conference on Mechanics of Functional Materials and Structures, Dec 2012, IIT Delhi.
  • "Effect of process parameters on centrifugally cast Al-Si FGM" TMS2013, 142nd Annual Meeting and Exhibition, 2013, USA.
  • "A study to understand Al6061-ZrSiO4 Metal Matrix Composites" International Conference On Recent Advances in Material Processing Technology (RAMPT'13)", 07-09 Jan 2013, NEC, Kovilpatti, Tamilnadu.
  • "Influence of combined grain reinforcement and modification on microstructure and mechanical properties of Al-7Si, Al-7Si-4.5 Cu" IMCIET-2014, Elsevier Publications.
  • "Experimental study of process variables on the bead geometry through flux cored arc welding" IMCIET-2014, Elsevier Publications.
  • "Numerical Simulation of Centrifuge Casting Technique" IMCIET-2014, Elsevier Publications.
  • "Mathematical Modeling and Heat Transfer Study of Centrifuge Casting Technique" IMCIET-2014, Elsevier Publications.

FACULTY NAME : DR.VIJAYKUMAR RAMANATH. KABADI

DESIGNATION : PROFESSOR

International Journals:

  • D. G.Mallapur, D. G. Sondur and V. R.Kabadi ‘Influence of Martensite Phase on the Tribological Properties of Plain Carbon Steel’. Procedia Material Science. 2211-8128 International 2014. Pp.464-471
  • Sharanabasappa.M, V.R.Kabadi, VeerabhadrappaAlgur. ‘Some Investigation on Dry Sliding Wear Behaviour of Ultra High Carbon Steel’ International Journal of Mechanical Engineering Research (IJMER), Volume 4, Number 1 (2014) pp. 75-82
  • Ramesh R.Burbure, V.R.KabadiDr..Ganechari S.M. ‘Studies on tribological wear behaviour for optimization of dual-phase steels’. International Journal of Engineering Material and Applied Science, July 2014, Vol-2, Issue-1
  • S.M. Ganechari a, V.R.Kabadi b, S.A.Kori.c, Ravi Tikotkard ,Studies Of High Temperature Sliding Wear Of Low Carbon Nickelchromium Based Alloy Steel, Journal of Advances in Engineering Science Section B (1), January - June 2010, PP 25-32
  • S M Ganechari V R Kabadi S A Kori Tikotkar R G Studies of High Temperature Sliding Wear of Medium Carbon Nickel-Chromium Based Alloy Steel, International Conference and Workshop on Emerging Trends in Technology (ICWET 2010) – TCET, Mumbai, India
  • Veerabhadrappa Algur1, Dr. V.R. Kabadi2, Dr. Ganechari S M3, Sharanabasappa.M4, Akkasali Taranath5 Some Investigations on the Tribological Wear Behaviour of Modified ZA–27 Alloy Based On Taguchi Method, International Journal of Mechanical and Industrial Technology ISSN 2348-7593 (Online) Vol. 2, Issue 1, pp: (20-27), Month: April 2014 - September 2014
  • Veerabhadrappa Algur1, V R Kabadi2, Ganechari S M3 and Sharanabasappa M4 Experimental Investigation On Friction Characteristics Of Modified Za-27 Alloy Using Taguchi Technique, ISSN 2278 – 0149 www.ijmerr.com Vol. 3, No. 4, October 2014
  • Veerabhadrappa V.R.1 Kabadi2 Ganechari S M3 . Analysis Of Wear Behaviour Of A Heat Treated Modified ZA-27 Alloy By Taguchi Technique, International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169 Volume: 2 Issue: 12 4095 – 4104
  • 1,*VeerabhadrappaAlgur , 2Kabadi, V.R., , 3Ganechari, S. M. , 4Shetty, P.B .,Optimization Of Friction Performance Of A Heat Treated Modified Za Using Design Of Experiments, International Journal of Current Research Vol. 7, Issue, xx, pp.xxxx-xxxx, xxxxxxxxx, 2015, ISSN: 0975-833X
  • SHARANABASAPPA. M1, V. R. KABADI2 & VEERABHADRAPPA ALGUR3 The Effect Of Pearlite, Cementite And Martensite Phases On Volumetric Wear Rate Of Hypereutectoid Steel Under Dry Sliding Conditions , International Journal of Metallurgical &Materials Science and Engineering (IJMMSE) ISSN(P): 2278-2516; ISSN(E): 2278-2524 Vol. 5, Issue 1, Feb 2015, 31-38
  • Sharanabasappa M1*, V R Kabadi2, P B Shetty2 and Veerabhadrappa Algur3 Dry Sliding Wear Behaviour Of Hypereutectoid Steel Under The Influence Of Microstructures, Sliding Speeds And Normal Pressures, ISSN 2278 – 0149 www.ijmerr.com Vol. 4, No. 2, April 2015© 2015 IJMERR.
  • Veerabhadrappa Algur1 V.R. Kabadi2 .Ganechari S M3 Analysis Of Wear Behaviour Of A Heat Treated Modified ZA-27 Alloy By Taguchi Technique, International Journal On Recent And Innovation Trends In Computing And Communication ISSN: 2321-8169 Volume: 2 Issue: 12 4095 – 4104.
  • ChandrashekharAmbiger, V.R.Kabadi, N.Gupta, K.G.Ambli, Rajesh bhide ‘Influence of Substrate of the Carbon Content and coating Thickness on Scratch and Wear Resistance of AlCrN films’ material Science and Metallurgy Engineering. 2016, vol.3, No.1, pp. 1-7.
  • VeerabhadrappaAlgur, V.R.Kabadi, Ganechari S.M, A.M.ShivaprakashSwamy, B Naveen Kumar ‘ProcesParameteric Optimization of Impact Test Using Taguchi and ANOVA Approach’ IPASJ International Journal of Mechanical Engineering (IIJME) Volume 4, Issue 1, January 2016.
  • VerabhadrappaAlgur, V.R.kabadi, Sharanabasappa, Ganechari S.M, P.b.Shetty, ‘Optimization of Sliding Specific Wear and Frictional Force Behaviour of Modified ZA-27 alloy Using Taguchi Method’ International Journal on Recent and Innovation Trends in Computing and Communication. Vol.3, Issur.5, (May 2015), pp.2644-2649.
  • P.Balachandra Shetty, V.R.Kabadi, P.Balakrishna Shetty ‘Foundation Principles for Teachers in Bhagavad Gita’ Indian Journal of Hmanities and Social Science. ISSN 2347-324X Vol.3, No.1 (2015), pp.1-5.

    National Journals:

  • S.A.Kori, T.M.Chandrashekha, M.H.Hosur, V.R.Kabadi ‘Studies on Wear of Eutectic Al-Si alloy under dry sliding conditions’. Proceedings of the 53rd Indian foundry Journal, IIF Centre Kolkota, January 21-23, pp. 82-86
  • International Conference:

  • D. G. Mallapur, D. G. Sondur and V. R. Kabadi ‘Influence of Martensite Phase on the Tribological Properties of Plain Carbon Steel’ International Conference on Advances in Manufacturing and Materials Engineering’ (AMME-2014), 27th -29th March 2014, Organized by National Institute of Technology Surathkal, Mangalore, India. International 2014.
  • National conference:

  • D.S.Sondur, V.R.Kaadi ‘Effect of ferrite phase on wear behavior of plain carbon steel’. National Seminar at PDA college of Engineering Gulburga, Sept.2012.
  • Sharanabasappa, M. and Kabadi, V.R., "The effect of Normal Load, Sliding speed and Combination of Different Phases on dry Sliding Wear Behavior of Hypereutectoid steel," Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in , vol., no., pp.1,6, 27-28 Sept. 2013

FACULTY NAME : Dr. MADHUSUDHAN

DESIGNATION : PROFESSOR

International Journal:

  • Madhusudhan, Narendranath S., Mohan Kumar G C, “Effect of Mould wall thickness on rate of solidification of centrifugal casting”, International Journal of Engineering Science and Technology"(IJEST), Vol.2(10),2010,P6090-6094. ISSN:0975-5462
  • Madhusudhan, Narendranath S., Mohan Kumar G C, Mukunda P G, “Experimental study on rate of solidification of centrifugal casting” International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 1 ISSN: 1823-0334
  • Madhusudhan, Narendranath S., Mohan Kumar G C, “Experimental study on cooling rate of centrifugal casting based on grain size”, International Journal of Scientific & Engineering Research (IJSER), Volume 3, Issue 1, January 2012 (ISSN 2229-5518)
  • Madhusudhan, Narendranath S., Mohan Kumar G C , Mukunda P G, “Effect of Mould wall Temperature on rate of solidification of centrifugal casting”, International Journal of Advanced Materials Science, ISSN 2231-1211 Volume 4, Number 1 (2013), pp. 37-42, © Research India Publications.
  • Madhusudhan, Narendranath S., Mohan Kumar G C “Properties of centrifugal casting at different rotational speeds of the die”, International Journal of Emerging Technology and Advanced Engineering, ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 1, January 2013.
  • Effect of DI-CI Engine Fuelled with Ethanol Additive in Waste Vegetable Oil MethyEster , international journal of science, engineering and technology research, volume 1, july 2012.
  • Investigation of particle segregation and solidification time in FGM’s using centrifuge casting technique , Applied Mechanics and Materials, vols 776-767(2015) pp956-961.
  • International Conference:

  • “Experimental Study on Effect of Mould Wall Thickness on Rate of Solidification of Centrifugal Casting”, International conference (FIME 2010) held at NITK, Surathkal on 15-05-2010.
  • National Conference:

  • “Study of fluid behavior in Centrifugal Casting”, National conference on recent Trends in Manufacturing Technology (RTMT-09), 6&7 March, CEGC, Anna University Chennai. Understanding of fluid behavior in partially filled rotating cylinder”, National Conference on New Advances in Thermal, Design, Materials and Manufacturing Engineering-(NATDMME 09), March 05-07, 2009.

FACULTY NAME : Mr ARUN KUMAR GL

DESIGNATION : ASST.PROFESSOR

  • Arun Kumar G L &S.Majumdar, Numerical Simulation of Laminar Flow and Heat Transfer around a Circular Cylinder., Proceedings, The National Conference on Challenges In Research Technology in The Coming Decades,27th -28th September 2013, held at the SDMIT, Ujire,Karnataka, India.
  • Jayaram Bhat1, G.L. Arunkumar2,Thermodynamic Analysis of Organic Rankine Cycle using Different Working Fluids, Volume III, Issue VII, July 2014, IJLTEMAS, ISSN 2278 – 2540.

FACULTY NAME : Mr. CHETHAN KS

DESIGNATION : ASST.PROFESSOR

  • Chethan K .S, Dileep Kumar S C, Nuthan Prasad B.S, and S. Majumdar, Simulation of Flow past a Double Slotted Aerofoil using Multiblock Structured Grid, Proceedings, 14th Asian Congress of Fluid Mechanics - 14ACFM held at Hanoi and Halong, Vietnam from October 15 - 19, 2013 India.
  • Gunesh N Ravnikar, Chethan K S, Kiran Aithal S, "Mathematical Modelling and Heat Transfer Study of Centrifuge Casting Technique," in International Multi-Conference on Innovations in Engineering And Technology, Elsevier Publication, Bangalore, 2014
  • Parashuram A, Chethan K S, Kiran Aithal S, "Numerical Simulation of Centrifuge Casting Technique," in International Multi-Conference on Innovations in Engineering And Technology, Elsevier Publication, Bangalore, 2014.
  • Chethan K S, KiranAithal S, Madhusudan A, Shailesh Rao, "Investigation of Particle Segregation and Solidification time in FGM's using Centrifuge casting technique," Applied Mechanics and Materials, Vols. 766-767, pp. 956-961, 2015.

FACULTY NAME : Mr. HARISH N

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • Harish N, Hamritha S, Kiran Aithal S, " Characterization of Al-17wt%Si using centrifugal casting ” International Conference in Material processing technology  Trans Tech Publications, Applied mechanics and material 766-767,2015
  • Harish N, Nikhil Bhardwaj, Kiran Aithal S, P G Mukunda,A Study to understand Al6061- ZrSiO4 Metal Matrix Composite” RAMPT-2013, 3rd International Conference, National College of Engineering, Kovilpatti, Tamilnadu, India
  • A study to understand the hardness and micro-structure of Al- 17wt.%Si Alloy using centrifugal casting” ETET-2013, 3rd National Conference, Jyothi College of Engineering, Bangalore, India.

FACULTY NAME : Mr. MANJUNATH HN

DESIGNATION : ASST.PROFESSOR

    Details of theJournal papers:

  • Umesh T, Manjunath H N, Rukmangadha P, Dr.Madhu D : Experimental Study of Performance & Emission Analysis of Rice bran oil as an Alternative fuel for an I.C.Engine- IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4, Ver. II (Jul – Aug. 2014)
  • Venugopal V, Manjunath H N, Rukmangadha P, DrMadhu D: Experimental investigation of performance and emission characteristics of lemon grass as biodiesel- IOSR Journal of Technical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4, Ver. II (Jul – Aug. 2014), PP 00-00
  • Dr.Kiran Aithal S, Ramesh Babu N, Manjunath HN, Dr.S N Narendranath: Development and Characterization of Al-Si-Cu FGM Using Centrifuge Technique – Applied Mechanics and Materials Vols. 766-767 in 2015 k Advances in Materials and Manufacturing. TransTech publications
  • Details of the Conference:

  • Dr. Jharna Majumdar1, Ramesh Babu N2, Sunil Kumar H S2, Manjunath H N2, R Praveen Kumar Jain3, Venkatesh G M3, Srikanth A3, Gurinder Singh Gill3- Vision Based Interactive Robotic Exhibits for Museums,-First IEEE International Symposium on Cost-Effective Museum Exhibits in Engineering and Applied Science 30th Dec-2nd Nov 2012
  • Jayanth D, Karthik P, Madhu D, Kaushik R, Manjunath HN: Diesel-Jatropha-Ethanol blends: Performance and emmisions on C.I engines- KSBDB state level conference sponsered by KSCST
  • Naveen.C, Chethan.S.Shetty, Ramesh P.H, LingarajPatil, Ramesh Babu N, Manjunath HN : Solar Energy Storage Using Phase Change Materials- Emerging Trends in Engineering & Technology-ETET 2013, Jhothi Institute of Technology, Bangalore
  • Ashok Kumar K, N.Kapilan, Manjunath H N: Production of Biodiesel from Honge Oil and its Effect on Diesel Engine- International Conference on Convergence of Science, Engineering and Management in Education and Research: A Global Perspective - 2nd Edition, on 26 & 27 September 2013, DSCE.Bangalore
  • Muralidhara DM, Manjunath HN, SharanappaGodiganur: Performance and Emission characteristics of Neem oil on CI Engine- National conference on RECENT TRENDS IN ALTERNATIVE ENERGY- “BIOFUELS, SOLAR, ELECTRIC & AIR” IN REDUCING POLLUTION OF MOTOR VEHICLES: 26 -27 November 2013 orgnized by Department of Mechanical & Electrical and electronics engineering in association with R.T.O.Yeshawanthapura, Transport Department, Government of Karnataka
  • Chetan Kumar, Manjunath H N, Sharanappa G, Kumar G N: Evaluation of performance & emission characteristics of Mahua oil on L H R diesel engine- National conference on RECENT TRENDS IN ALTERNATIVE ENERGY- “BIOFUELS, SOLAR, ELECTRIC & AIR” IN REDUCING POLLUTION OF MOTOR VEHICLES: 26 -27 November 2013 orgnized by Department of Mechanical & Electrical and electronics engineering in association with R.T.O.Yeshawanthapura, Transport Department, Government of Karnataka
  • Ashok Kumar K, N.Kapilan, Manjunath H N: Studies on Performance and Emission Characteristics of Honge Biodiesel Fuelled Diesel Engine- National conference on RECENT TRENDS IN ALTERNATIVE ENERGY- “BIOFUELS, SOLAR, ELECTRIC & AIR” IN REDUCING POLLUTION OF MOTOR VEHICLES: 26 -27 November 2013 orgnized by Department of Mechanical & Electrical and electronics engineering in association with R.T.O.Yeshawanthapura, Transport Department, Government of Karnataka
  • Saisiddhartha , Sunil kumar, Varun S H, Manjunath H N: Hydrogen IC engine- National conference on RECENT TRENDS IN ALTERNATIVE ENERGY- “BIOFUELS, SOLAR, ELECTRIC & AIR” IN REDUCING POLLUTION OF MOTOR VEHICLES: 26 -27 November 2013 orgnized by Department of Mechanical & Electrical and electronics engineering in association with R.T.O.Yeshawanthapura, Transport Department, Government of Karnataka
  • Sushant H Gowda, Raju K, Balaraman E, Manjunath HN: Investigation of humidification & Dehumidification in a SILICA gel packed bed by SSR model- National conference on TRENDS IN MECHANICAL ENGINEERING:16- 17 Jan 2014 orgnized by Department of Mechanical engineering under TEQIP-II.- NMIT, Bangalore
  • Praveenkumar M Sindagi, Ajey C P, Manjunath H N, Dr. N Kapilan: Studies on Performance of Solar Based Refrigeration and Air Conditioning System- NATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING- 2015,KSSEM,Bangalore,28th April 2015
  • KumareshHiremath, ManjunathGowda M, Manjunath H N, Dr. N Kapilan: Studies on Performance of Solar Powered Evaporative Cooling System- NATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING- 2015,KSSEM,Bangalore,28th April 2015.
  • 1Santhosh n, 2Srikanth H V, 3Manjunath H N, 4Sharanappa Fish Oil Biodiesel as an Additive in Diesel-Ethanol Blends for a Four Stroke Single Cylinder Diesel Engine, RTAE-2013

FACULTY NAME : Mr NUTHAN PRASAD B S

DESIGNATION : ASST.PROFESSOR

  • Nuthan Prasad B S, SekharMajumdar, “Numerical simulation of a turbulent flow past a low aspect ratio wing” Proceedings 40th National conference on fluid mechanics and fluid power, at NIT Hamirpur, Dec 12th to 14th 2013.
  • Chethan K .S, Dileep Kumar S C, Nuthan Prasad B.S, and S. Majumdar, Simulation of Flow past a Double Slotted Aerofoil using Multiblock Structured Grid, Proceedings, 14th Asian Congress of Fluid Mechanics - 14ACFM held at Hanoi and Halong, Vietnam from October 15 - 19, 2013
  • Nuthan Prasad B.S., Anil Kumar M., SharathSimhanC.M.,Ramakrishna H.E.,Ranjith V.R. &S.Majumdar, Numerical simulation of Turbulent flow through Ducts with Longitudinal variation of Curvature and Cross-sectional Area, Proceedings,13th Annual CFD Symposium on 11th-12th August 2011, held at the S.S.DhawanAuditorium,Indian Institute of Science (IISc), Bangalore India.

FACULTY NAME : Mr PRAVEEN B A

DESIGNATION : ASST.PROFESSOR

  • Vinayaka.N, Santhosh.N ,Dr.Aswatha , Uday.M , Praveena.B.A , "Computational Analysis and Design for Precision Forging of Aluminium AA 6061 Connector”, International Journal of Computational Engineering Research (IJCER-2013) , Vol. 03, Issue. 09, pp. 36-43
  • Praveena.B.A,.”Optimum design of conical draft tube by analysis of flow using simulation”, volume III, issue vii, july 2014, ISSN 2278-2540.IJLTEMAS.
  • Praveena.B.A,.Estimation of sub surface residual stress in machining by finite element modeling, national conference on developments and opportunities in civil Engg, applied sciences and mechanical Engg (DOCAM 2012) may 18-19, 2012, EWIT
  • Praveena.B.A,.”Finite element analysis of chip formation during grinding”, 2nd international conference on advances in mechanical , manufacturing and building sciences (ICAMB) held at VIT University, Vellore from Jan 9-12, 2012

FACULTY NAME : Mr. PRAVEEN KUMAR S

DESIGNATION : ASST.PROFESSOR

  • N. Santhosh, B.K Muralidhara, S. Praveen Kummar, "Flow Simulation & Characterization Of Aluminium Forgings Conforming To Aa6061 Specification" – Ijair.—2013
  • N.Santhosh, Rudranaik, Kempaiah, Praveen Kumar S ,Mahendra, “Development &Characterzition Of High Performnce Reinforce Carbon Fibre& Glass Fibre Composites”.Ijair-2013.

FACULTY NAME : Mr. RAVI PRAKASH

DESIGNATION : ASST.PROFESSOR

  • Ravikiran,Raviprakash,"Experimental Investigation on Diesel Engine using Fish oil methyl ester as Alternative Fuel", International Journal of Engineering Research and General Science , vol -3 Issue 2, March - April 2015

FACULTY NAME: Mrs. SMRUTIREKHA SEN

DESIGNATION: ASST.PROFESSOR

  • SmrutirekhaSen, Sudheer Reddy, PG Mukunda.,”Modeling and Experimental studies on Centrifugal Cast Al-SI alloy, TIME-2014,NMIT,Bangalore

FACULTY NAME : Mr. RAMESH BABU N

DESIGNATION : ASST.PROFESSOR

  • Dr Jharna Majumdar1, Ramesh Babu N2, Sunil Kumar H S2, Manjunath H N2, R Praveen Kumar Jain3, Venkatesh G M3, Srikanth A3, Gurinder Singh Gill3- Vision Based Interactive Robotic Exhibits for Museums,- First IEEE International Symposium on Cost-Effective Museum Exhibits in Engineering and Applied Science 30th Dec-2nd Nov 2012

FACULTY NAME : Mr. RUDRA NAIK M

DESIGNATION : ASST.PROFESSOR

  • N. Kusuma, RudraNaik. M, S. M. Murigendrappa,P.V. Shashi Kumar “Interfacing Of Mems Accelerometer With PLC For Real-Time Health/Condition Monitoring Of CNC Machin
  • Babu K N, MallikarjunaBiradar,Dr. N G S Udupa,RudraNaikM,Santhosh N “Characteristic Evaluation of Wear Properties of NiTiAl Based Shape Memory Alloys for different Composition” IJAIR-2014
  • "Development &Characterzition Of High Performnce Reinforce Carbon Fibre & Glass Fibre Composites”.IJAIR-2013
  • "Thermal Simulation of FCBGA Package with Heat Sink”, presented at comsol multi physics Conference, Nov 13-14, 2014.

FACULTY NAME : Mr. SRIRAM MUKUNDA

DESIGNATION : ASST.PROFESSOR

  • Sriram Mukunda, Narendra Nath. S, P.G. Mukunda, "Effect of Copper content and low temperature aging on Nitinol", Indian Foundry Journal, Vol. 57, No. 8, pp. 23-27, August 2011.
  • SriramMukunda, NarendraNath S, "Effect of Copper content on the wear properties of Nitinol", presented at International Conference on Advanced Materials at BTL Institute of Technology, Bangalore on August 20th 2011.
  • SriramMukunda, DelliBabu, NarendraNath S, Mervin A. Herbert,"Effect of heat-treatment and alloying on properties of NiTiCu", presented at an International Conference RAMPT-2013 held at National Engineering College, Kovilpatti, TAmil Nadu on January 7th-9th 2013.
  • Sriram Mukunda, NarendraNath S, Mervin A. Herbert, P. G. Mukunda,"Effect of heat-treatment and alloying on mechanical properties of NITINOL", presented at a National Conference Trends in Mechanical Engineering (TIME-2014) held at NMIT Bangalore on January 16th-17th 2014.
  • SriramMukunda, NarendraNath S, Mervin A. Herbert, P. G. Mukunda,"Effect of low temperature annealing on the tribological properties of Ni-Ti shape memory alloys", presented at a National Conference on Innovative Research on Materials, held at Christ University, Bangalore on November 16th-17th 2014.
  • Sriram Mukunda, Narendra Nath S, Mervin A. Herbert, P. G. Mukunda, “Effect of low temperature annealing on the wear properties of NITINOL”, presented at International Conference at University of Malaysia Pahang held on November 11th – 13th 2015, published in Institute Of Physics Conf. Series: Materials Science and Engineering 114 (2016) 012119 doi:10.1088/1757-899X/114/1/012119.

FACULTY NAME : Mr. SUNIL KUMAR

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • 1. Dr Jharna Majumdar1, Ramesh Babu N2, Sunil Kumar H S2, Manjunath H N2, R Praveen Kumar Jain3, Venkatesh G M3, Srikanth A3, Gurinder Singh Gill3- Vision Based Interactive Robotic Exhibits for Museums,-First IEEE International Symposium on Cost-Effective Museum Exhibits in Engineering and Applied Science 30th Dec-2nd Nov 2012Control and Navigation of Differential Drive Mobile Robot, Dr Jharna Majumdar, Sunil Kumar H S, Prashanth N, Sandeep Malu, Recent Trends in Robotics, 2013

FACULTY NAME : Mrs. HAMRITHA

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • Hamritha S, Desai Gowda H S ., “Study of mechanical properties of Faded spheroidal graphite iron
  • International Conference on emerging trends in manufacturing engines and Modelling”, IJAER publications PP10283-10286,2015.
  • Hamritha S, N G S Udupa, Desai Gowda H S, Mervin A Herbert, "Effects of fading in spheroidal graphite iron used in cylinder liners" ETET -2013, JYOTHY INSTITUTE OF TECHNOLOGY-Bangalore
  • Harish N, Hamritha S, Kiran Aithal S, " Characterization of Al-17wt%Si using centrifugal casting ” International Conference in Material processing technology  Trans Tech Publications, Applied mechanics and material 766-767

FACULTY NAME : Ms KRUPA R

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • . Krupa R, Sheetal N Singh, “ To produce Bio Diesel from milk dairy wash water scum-study of its properties, performance and emission characteristics as a blended fuel on IC engine/ KSBDB National compendium-article 7, 2012-13
  • Krupa R, ,SachinNaraian , Shivayogi, RovinsRoshan“Production Of Ethanol From Fruit Waste And Blending It With Rice Bran Oil as an alternate fuel for diesel engines – TIME 2014, NMIT.

FACULTY NAME : Mr. SURESH KR

DESIGNATION : ASST.PROFESSOR

Details of the Conference/Journal papers:

  • Suresh K.R, Mahendran S, M.S.Krupashankara, Avinash L., " Influence of Powder Composition & Morphology on Green Density for Powder Metallurgy Processes", International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 1, January 2015
  • Sanjay K N,Dr. Aprameyan S , Suresh K R , Santhosh A N "Sliding wear of RRA Treated High Strength Aluminum Alloy "  International Research Journal of Engineering and Technology", Vol 2,Issue 3, June  (2015) pp 1957-1960. / https://www.irjet.net/archives/V2/i2/Irjet-v2i3315.pdf

FACULTY NAME : MR. PAVAN K N

DESIGNATION : ASST.PROFESSOR

  • Pavan.K.N , Dr.SekharMajumdar ,Shiv Pratap Singh Yadav , " CFD Analysis of Turbulent Incompressible Flow in Y Shaped Air-Intake Ducts", Proceedings National Conference,-TIME 2014, NMIT

FACULTY NAME : MR. SACHIN B

DESIGNATION : ASST.PROFESSOR

  • Studies on Laser Dressed Super Abrasive Grinding Wheels”, International Conferenceon Convergence of Science, Engineering and Management in Education and Research,DayanandaSagar College of Engineering, Bangalore, 27th September 2013.
  • “A Study on Wire Breakage in Wire EDM”, Emerging Trends in Engineering andTechnology, Jyothy Institute of Technology, Bangalore, 9th March 2012.“A Study on Surface Engineering-Laser Cladding”, National Welding Seminar, KTPO,Bangalore, 9th February 2013.
  • “Optimization and Prediction of Laser Dressed Super Abrasive Grinding Wheels”,National Level Technical Symposium Pratibimb, The National Institute of Engineering,Mysore, 31st October 2013.
  • “Optimization of cutting conditions on surface finish in diamond turning process”,National Level Technical Symposium Pratibimb, The National Institute of Engineering,Mysore, 31st October 2013.
  • “A Study on Recent Trends: Additive Manufacturing”, National Conference onAdvances in Mechanical Engineering, K S School of Engineering and Management,Bangalore, 12th November 2013.
  • “A Review on Laser Cladding Process”, National Conference on Trends in MechanicalEngineering, NitteMeenakshi Institute of Technology, Bangalore, 17th January 2014.

FACULTY NAME : Mr. AVINASH L

DESIGNATION : ASST.PROFESSOR

  • “The effect of ceramic reinforcement on the Microstructure, Mechanical properties and Dry sliding wear behavior of hypo-eutectic Al-Si-Mg alloy” International Journal of Innovative Research in Science, Engineering and Technology ISSN 2319-8753 Volume 2, issue 3, march (2013).
  • “The Effect of Heat Treatment on the Microstructure, Mechanical properties and Dry Sliding Wear Behaviour of A356.0 Reinforced with Alumina” International Journal of, Innovative Research in Science , Engineering and Technology ISSN 2319-8753 Volume 2, issue 4 April (2013)
  • “Influence of Powder Composition & Morphology on Green Density for Powder Metallurgy Processes “International Journal of Innovative Research in Science, Engineering and Technology, ISSN 2319-8753 Volume 4, January (2015)

FACULTY NAME : Mr. SANDEEP GM

ESIGNATION : ASST.PROFESSOR

  • Dr. Shantharaja M., Mr. Sandeep G. M.," Experimental And Numerical Analysis Of Propagation Of Stress Wave In Sheet Metal",INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 3, ISSUE 10, OCTOBER 2014 ISSN 2277-8616,
  • B.S. Surendra, G.M. Sandeep and P. Balachandra Shetty "Design and Fabrication of Inverted Cup Single Action Press Draw Tool." International Journal of Latest Technology in Engineering, Volume IV Issue VI is june, 2015, pp 15-17, impact factor 2.115, www.ijltemas.in

FACULTY NAME : Mr. PRASHANTH N

DESIGNATION : ASST.PROFESSOR

  • Mr. Pavan Kumar AV ,Mr. Mohan G , MrBrijesh N, Mr. Chethan V, Mr. Prashanth N, “IC Engine Powered Forward and Reverse Transmission for All Terrain Robot”, International Conference on Computer Science and Mechanical Engineering (ICCSME), 22nd March 2015 Pune. IR-CSMEPUNE-22035-320.
  • Dr. Jharna Majumdar, Sunil Kumar H S, Prashanth N, R Praveen Kumar Jain, Sandeep Kumar Malu, “Design & Development of Fixed Serial Manipulators & Autonomous Mobile Robots” National Conference on Recent Trends in Engineering (May-2013), SVCE, India.
  • Prashanth.N, Subbaya.K.M, Rajendra.N, Varadarajan.Y.S,“ANN Prediction & Taguchi Approach for Three Body Abrasive Wear Behavior of Carbon Fiber Reinforced Epoxy Composite”, International Conference on Emerging Trends in Engineering (ICETE-2011). - Nitte,Mangalore,Karnataka,INDIA : NMAMIT, 4-5th May 2011. ISBN: 978-93-81195-07-9
  • Prashanth.N, Subbaya.K.M, Rajendra.N, Varadarajan.Y.S “Solid Particle Erosion Wear Behaviour of Carbon Fiber Reinforced Epoxy Composite Using Taguchi Approach”, 5th national Conference on Plastic & Rubber Technology (POLYCON-2011). - Mysore,Karnataka,INDIA, 25-26th April 2011.
  • Prashanth.N, Subbaya.K.M, Rajendra.N, Varadarajan.Y.S, “Taguchi Method and ANOVA Approach for Investigation on Three-body Abrasive Wear Behaviour of Carbon Fabric Reinforced Epoxy Composite with and without Graphite Filler”, International Conference on Operational Excellence And Global Competitiveness (ICOEGC-2011). - Bangalore,Karnataka,INDIA : RVCE & ABCON Information System, 3-5th February 2011.

Untitled Document