AERONAUTICAL ENGINEERING
DEPARTMENT HIGHLIGHTS

The department of Aeronautical Engineering was started in the academic year 2011-12 with an authorized intake of 60 students per annum. At present there are about 240 students, not only from all over India...

Read more
VISION, MISSION, OBJECTIVE & OUTCOMES

To build outstanding teaching and research environment in the field of Aeronautical Engineering that equips the students with the latest theoretical and practical knowledge and enhances their opportunities in the ..

Read more
PROJECT HIGHLIGHTS

Students of the 6th Semester, Niraj Panthi, Ebin Baby, have successfully completed an Innovation and Entrepreneur Development Cell (IEDC), NMIT, sponsored project titled, "Foot Step Energy Harvester"...

Read more
APPLY NOW FEE STRUCTURE VISIT CAMPUS

Contact
Dr. S Venkateswaran
Professor and HOD,
Department of Aeronautical Engineering,
Nitte Meenakshi Institute of Technology, P.O. Box 6429, Govindapura, Golahalli, Yelahanka, Bangalore 560064.
Ph: 080-22167803, (Ext 981)
E-mail:​HOD-AE@nmit.ac.in, hodaeronmit@gmail.com​

Publications

2016
Ashwin C. Gowda, D P Girish, Santhosh N, Ashok Kumar, Study of Wear Characteristics of Aluminium/B4C/CNT Hybrid Composites under the Influence of Controlled Factors, Nano Trends: A Journal of Nanotechnology and Its Applications Volume 18, Issue 2, ISSN: 0973-418X, 2016
Ashwin C. Gowda, Santhosh N, Aswatha, Santosh S, Salman Saif Khan, K. Priyarajtej, “Design and Structural Analysis of Bracket for Control Unit in Light Combat Aircraft”, Journal of Aerospace Engineering & Technology, Volume 6, Issue 1, May 2016.
Development and Study of Flat Wise Compressive Strength of Eutectic Al-Si Alloy Fly-ash Cenosphere Open Cell Foamed Composite Core Sandwich Panel, T. N. Praveen Kumar, N. Suresh, S. Venkateswaran, S. Seetharamu, American Journal of Materials Science, p-ISSN: 2162-9382, e-ISSN: 2162-8424, 2016; 6(4A): 56-60, doi:10.5923/c.materials.201601.11, August 2016
2015
Srikanth H V, “Experimental Investigations on Performance and Emissions of a C.I. Engine Fuelled with Milk Dairy Waste Scum Oil Biodiesel”. “Journal of biofuels”: Volume 6, No 1; June 2015.
Chetan kumar R, Dr. C Badarinath, Mohankumar C P, Harish H V, “Enhancement of coefficient of performance by analysis pf flow through vapour compression refrigeration cycle using CFD” IARJSET, Volume 02 Issue 06, June 2015.
Srikanth H V, “A Study on Effect of Cold Flow Improvers on Crystallization Properties of Dairy Washed Milk scum oil Biodiesel” ICAER-2015 an international conference in the month of December at IIT Bombay.
Harish H V, “Experimental verification deflection of beam using theoretical and numerical approach”, IJAREST, volume 02 Issue 03, March 2015
Dr. Venkata Ramana Reddy Mula, H.V.Harish. “Enhancement Of Coefficient Of Performance In Vapour Compression Refrigeration Cycle” IJRAME, Volume: 03, Issue 10, Oct-2015.
Shaik Ismail, A.A. Pashilkar and Ramakalyan Ayyagari, "Phase Compensation and Anti-windup Design for Neural-aided Sliding Mode Fault - tolerant Autoland Controller," Intl. Conf. on Cognitive Computing and Information Processing CCIP 15: Special Session on Cognitive Computing in Intelligent Aerospace Control, 3-4 March 2015, JSS Academy of Tech. Edn., Noida, India. Technically Co-Sponsored by IEEE UP Section (Conference # 35256).
Production and study of Mechanical Properties of Open Cell eutectic Al-Si Al Foam, T.N.Praveen Kumar, S.Venkateswaran, S.Seetharamu, S.B.Kandagal, International Conference on Advances in Production and Industrial Engineering (INCAPIE-2015) NIT, Tiruchirapalli, 20-21 February, 2015.
Studies on Compressive and Damping Properties of Closed Cell Eutectic Aluminium Silicon Alloy foam, , T.N.Praveen Kumar, S.Venkateswaran, S.Seetharamu, S.B.Kandagal, International Conference on Emerging trends in Mechanical Engineering (ICETIME - 2015), Royal College of Engineering and Technology, Thrissur, 26-28 March, 2015.
Crushing Behaviour of Axially Compressed Steel Tube of Square Section Filled with Eutectic Al-Si Alloy Open Cell Foam, T.N Praveen Kumar, S.Venkateswaran, S.Seetharamu, International Conference on Advances in Materials and Mechanical Engineering (ICAMME 2015), EGS Pillay Engineering, Nagapattinam, Tamilnadu, Oct. 2015.
Crushing Behaviour of Axially Compressed Steel Tube of Square Section Filled with Eutectic Al-Si Alloy Open Cell Foam, , T.N.Praveen Kumar, S.Venkateswaran, S.Seetharamu, S.B.Kandagal, International Journal of Applied Engineering Research, Vol. 10, No.51, Oct. 2015, ISSN 0973-4562.
Effect of grain size of calcium Carbonate Foaming Agent on the Physical Properties of eutectic Al-Si alloy closed cell foam, , T.N.Praveen Kumar, S.Venkateswaran, S.Seetharamu, Transactions of the Indian Institute of Metals, an International Journal of Minerals, Metals and Materials Engineering, Springer Publication, Vol.68, Supplement 1, 2015, ISSN0972-2815, pgs 109.
Effect of grain size of calcium Carbonate Foaming Agent on the Physical Properties of eutectic Al-Si alloy closed cell foam, T.N.Praveen Kumar, N.Suresh, S.Venkateswaran, S.Seetharamu, International Conference on Advances on Emerging Trends in Mechanical Engineering (TIME2015), St.Joseph Engineering College, Mangalore, 7-8 August 2015.
Effect of grain size of calcium Carbonate Foaming Agent on the Physical Properties of eutectic Al-Si alloy Closed cell foam, T.N.Praveen Kumar, S.Venkateswaran, S.Seetharamu, International Conference on Manufacturing and Materials Engineering, (ICMME 2015), AmalJyothi College of Engineering, Kanjirapalli, Kerala, 23-24 July, 2015.
Effect of grain size of calcium Carbonate Foaming Agent on the Physical Properties of eutectic Al-Si alloy Closed cell foam, T.N.Praveen Kumar, N.Suresh, S.Venkateswaran, S.Seetharamu, American Journal of Material Science, 2015.
Studies on structure and properties of ZA alloys and their composites. O. Gurumurthy and S. Venkateswaran, International Conference on Aerospace and Mechanical Engineering, TKM college of Engineering, Kollam, Kerala, 14-16 Dec. 2015.
Aluminium foam-Innovative Materials for Building and Construction: a Review and Development of bathroom grating utilizing Open Cell Al-Si-fly-ash cenosphere foamed composite materials T.N.Praveen Kumar, S.Venkateswaran, S.Seetharamu,: National Conference on Technological Innovations for Sustainable Infrastructure, (TISI), NIT Calicut, March 13-14, 2015, (NIT), Calicut, Kerala.

2014
Harish H V, Comparison of experimental and CFD analysis for natural convection heat transfer coefficient, IJAIR, 2278-7844 PG 85-87, VOLUME 3, ISSUE 8, 2014.
Harish H V, Enhancement of heat transfer by analysis of fluid flow in inclined non circular duct, IJAIR, 2278-7844, 444-446 VOLUME 3, ISSUE 11, 2014.
Harish H V,Santhosh N, Nishant Desai, Srikanth H V, Optimum design of conical draft tube by analysis of flow using CFD simulation, IJLTEMAS, 2014.
SRIKANTH H V, BHARATH KUMAR S, SHANKAR NAG G L, SHARANAPPA GODIGANUR. "Experimental investigation on performance and emission characteristics of diesel engine using diesohol-niger seed oil biodiesel blends", IJTEMAS, ISSN:2278-2540, Vol 3, Issue 7, July 2014.
Kempaiah U N, Santhosh N, Harshith Kumar D, Chelgeri A H, Vishnu P, and Raorane S, "Characterization of high performance Al 5083/SiCp/Fly ash hybrid metal matrix composite for advanced aerospace applications," Intl. Jl. Of Advanced and Innovative Research, Vol.3, Issue 10, pp. 311-318, 2014.
SanthoshN,Shivakumar N D, Chetan D M, PoojaKumari, Sahana B C, and Mahalya R, "Design and Analysis of Engine Mounting Frame of an Unmanned Aerial Vehicle", Intl. Jl. of Research in Aeronautical and Mechanical Engineering (IJRAME), ISSN 2321-3051, Vol. 2, Issue 5, May-2014, PP 27-34.
   

2013
R Jayakumar, Harish H V, Santosh N, Nishant Desai, Srikanth H V, Shrilakshmi V B and Sharmitha, "Experimental verification of flow through convergent nozzle using CFD simulation," IJAR 2278-7844 Volume, ISSUE -9, 2013.
Harish H V, optimum design of rocket nozzle for enhancement of thrust using CFD, IJAIR, 2278-7844, VOLUME 3, ISSUE 6 19-22, 2013
R Jayakumar, Harish H V, Mahendra M A, Validation of experimental results of heat transfer coefficient using CFD simulations, IJAIR PG 155-157, VOLUME, ISSUE 1,2013.
Harish H V, CFD simulation and experimental verification of air flow through heated pipe, IJAIR, 2013
MayurAnvekar, “Deflagration to Detonation Transition in Kerosene Pulse Detonation Engine” at Journal of Aeronautics and Aerospace Engineering. 2013
MayurAnvekar, “Air-Fuel injection into Detonation combustion chamber” in IJEIT. 2013.
SrikanthH V, SanthoshN, SharanappaGodiganur, and Venkatesh J, “Fish oil biodiesel as an additive in diesel-ethanol blends for a four stroke single cylinder diesel engine,” International Journal of Engineering Research and Technology, IISN: 2278-0181, Vol 2, Issue 9, September 2013, pp1343-1352.
Santhosh N, Muralidhara B K, and Praveen Kumar S, “Flow Simulation and Characterization of Aluminum Forgings Conforming to AA 6061 Specification,@ 3rd Intl. Conf. on Recent Advances in Material Processing Technology (RAMPT’13), National Engineering College, Kovilpatti, K.R.Nagar, Tamil Nadu, India. PP 114-117, Proc. of Conf., ISBN 978-81-904334-2-6, 2013.
Santhosh, N and MahamadMudabir R, “Thermomechanical Modeling and Experimental Evaluation of Friction Stir Welds of Aluminium AA6061 Alloy,” Intl. Jl. Of Engineering Research & Technology, Vol. 2, Issue 8, pp. 1494-1499, August 2013.
Santhosh N, RudraNaik M, Kempiah U N, Praveen Kumar S and Mahendra M A, “Development and Characterization of High Performance Reinforced Carbon-Fiber and Glass-Fiber Composites,” Intl. Jl. Of Advanced and Innovative Research, Vol. 2, Issue 9, pp. 99-105, 2013.
Santhosh N, Sharan Raj V, Mahendra M A, Harish H V Santhosh K J, “Comparative Evaluation of Mechanical Properties of Glass Fiber Composite Materials and Hybrid Carbon Fiber Composite Materials,” National Conference on “Advances in Mechanical Engineering 2013”, AME – 2013, KS School of Engineering and Management, Bangalore.
Santhosh N, Vinayaka N, Aswatha, Uday M and Praveen B A, “Computational Analysis and Design for Precision Forging of Aluminium AA 6061 Connector,” Intl. Jl. of Computational Engineering Research (IJCER), Vol. 03, Issue 9, ISSN 2250-3005, PP 36-43, 2013.
   
Untitled Document